The file is saved with a .cfg extension.
Restore the configuration
If you downloaded the configuration to a computer (see Download the running
configuration on page 74), you can restore both the running configuration and startup
configuration from your saved configuration file.
To restore the configuration:
1. Launch a web browser.
2.
In the address field of your web browser, enter the IP address of the switch.
The login page displays.
3.
In the Login Name field, enter admin as the user name, in the Password field, enter
your local device password, and click the AV UI Login button.
The first time that you log in, no password is required. However, you then must
specify a local device password to use each subsequent time that you log in.
The Overview page displays.
4.
Select Configure > Maintenance.
The Maintenance page displays.
5.
In the Configuration Management section, click in the Browse File field.
A pop-up window displays.
6.
Navigate to and select the saved configuration file.
The file has a .cfg extension.
7. Click the Upload button.
A pop-up window displays.
8. Click the Restore Now button.
The running configuration and startup configuration are restored.
Date and time settings
You can either set the date and time for the switch manually or configure one or more
Simple Network Time Protocol (SNTP) servers, allowing the switch to synchronizing its
internal clock with an SNTP server clock.
Audio Video User Manual75Manage and monitor the switch
AV Line of Fully Managed Switches M4250 Series
To Next Page
Loading...
Need help?
General
