Manually set the date and time
You can manually set the date and time for the switch.
To manually set the date and time:
1. Launch a web browser.
2.
In the address field of your web browser, enter the IP address of the switch.
The login page displays.
3.
In the Login Name field, enter admin as the user name, in the Password field, enter
your local device password, and click the AV UI Login button.
The first time that you log in, no password is required. However, you then must
specify a local device password to use each subsequent time that you log in.
The Overview page displays.
4.
In the Device Details section, below the Date & Time field, click the pencil icon.
The Time Configuration window displays.
5.
Click in the Date field, and from the pop-up calendar, select a date.
6.
Click in the Time field, use the menus to select the hour, minutes, seconds, and
meridian setting, and click the OK button.
7. Click the Apply button.
Your settings are saved. The window closes. The Overview page displays again.
8.
To save the settings to the running configuration, at the top of the page, click the
Save icon or text.
Configure one or more SNTP servers
You can configure one or more SNTP servers. You must know the domain names or IP
addresses of the SNTP servers that you want to use. By default, the switch configuration
includes one NETGEAR SNTP server, which is time-a.netgear.com.
To configure one or more SNTP servers:
1. Launch a web browser.
2.
In the address field of your web browser, enter the IP address of the switch.
The login page displays.
3.
In the Login Name field, enter admin as the user name, in the Password field, enter
your local device password, and click the AV UI Login button.
The first time that you log in, no password is required. However, you then must
specify a local device password to use each subsequent time that you log in.
Audio Video User Manual76Manage and monitor the switch
AV Line of Fully Managed Switches M4250 Series
To Next Page
Loading...
Need help?
General
