3.
In the Login Name field, enter admin as the user name, in the Password field, enter
your local device password, and click the AV UI Login button.
The first time that you log in, no password is required. However, you then must
specify a local device password to use each subsequent time that you log in.
The Overview page displays.
4.
Select Configure > Network Profiles.
The Network Profiles page displays.
5.
At the top right of the Profile Templates table, click the Create AV Template link.
The Create AV Profiles window displays.
6.
In the Profile Type field, enter a name for the type of service that the template can
provide.
7.
In the Profile Description field, enter a description for the template.
8. To enable multicast, turn on the Multicast toggle so that it displays green and is
positioned to the right.
By default, multicast is disabled and the toggle displays gray and is positioned to
the left.
9. To enable PTP, turn the PTP toggle so that it displays green and is positioned to the
right.
By default, PTP is disabled and the toggle displays gray and is positioned to the left..
10.
To add a QoS configuration to the template, do the following:
a.
To the right of the Quality of Service section, click the Add QoS link.
b.
The fixed selection from the QoS Type menu is DSCP, but this setting also
includes CoS.
•
In an incoming IP packet, the switch applies QoS according to the information
in the DiffServ Code Point (DSCP) field.
•
In an incoming Ethernet frame, the switch applies QoS according to the
information in the Class of Service (CoS) field.
You must select a value from the Code Point menu, a value from the Priority
menu, and a selection from the Scheduler Type menu.
c.
From the Code Point menu, select a value from 0 to 63.
The DSCP value that you select allows an incoming IP packet to be mapped to
the egress queue that you select from the Priority menu in the following step.
d.
From the Priority menu, select the priority value for the egress queue from 0 to
number 7.
Audio Video User Manual24Audio-Video Profile Templates
and Network Profiles
AV Line of Fully Managed Switches M4250 Series
To Next Page
Loading...
Need help?
General
