NETGEAR AV Series User Manual

(Continued)
CommentsPublish DatePublication Part
Number
We added the following chapters:
Security on page 62
Diagnostics and Troubleshooting on page 91
March 2021202-12148-03
We added the following sections to existing chapters:
Auto-Trunk overview on page 27
Enable or disable Auto-Trunks on page 29
Auto-LAG overview on page 34
Enable or disable Auto-LAGs on page 35
Configure the hash mode for Auto-LAGs on page 36
Save the running configuration on page 73
Download the running configuration on page 74
Restore the configuration on page 75.
Set the STP network redundancy for the switch on page 82
Display the status of the ports and switch on page 86
Display the neighboring devices on page 90
We changed the following sections:
Supported Switches on page 9
Use an AV profile template to configure and assign a network profile on
page 19
Create a custom AV profile template on page 23
Manage PoE interface settings on page 47
Save the running configuration on page 73
We added the following chapters:
Link Aggregation on page 33
Power over Ethernet on page 46
November 2020202-12148-02
We added a DHCP server option to Use an AV profile template to
configure and assign a network profile on page 19.
First publication.September 2020202-12148-01
4
AV Line of Fully Managed Switches M4250 Series

NETGEAR AV Series Specifications

General

Model	AV Series
Switching Capacity	Varies by model
Quality of Service	Yes
Jumbo Frame Support	Yes
Energy Efficient Ethernet	Yes
Ports	5, 8, 16
Layer	Layer 2
Mounting	Desktop
Speed	Gigabit Ethernet
Power Budget	Varies by model
Fanless Design	Yes