Figure 5. Bottom of the router
We recommend using pan head Phillips wood screws, 3.5 x 20 mm (diameter x length,
European) or No. 6 type screw, 1 inch long (U.S.).
Note
To wall-mount your router:
1. Drill holes in the wall where you want to wall-mount your router.
2. Insert wall anchors in the holes.
3. Insert screws into the wall anchors, leaving 3/16 in (0.5 cm) of each screw exposed.
4. Align the router’s wall-mounting holes with the screws and mount your router.
Hardware Overview of the Router
15
AC1750 Smart WiFi Router Model R6350
To Next Page
Loading...
