6. In the Port Triggering Time-out field, enter a value up to 9999 minutes.
The default setting is 20 minutes.
7. Click the Apply button.
Your settings are saved.
Disable Port Triggering
By default, port triggering is enabled.You can disable port triggering temporarily without removing any port
triggering rules.
To disable port triggering:
1. Launch a web browser from a computer or mobile device that is connected to the router network.
2. Enter http://www.routerlogin.net.
A login window opens.
3. Enter the router user name and password.
The user name is admin.The password is the one that you specified the first time that you logged in.
The user name and password are case-sensitive.
The BASIC Home page displays.
4. Select ADVANCED > Advanced Setup > Port Forwarding / Port Triggering.
The Port Forwarding / Port Triggering page displays.
5. Select the Port Triggering radio button.
The port triggering settings display.
6. Select the Disable Port Triggering check box.
If this check box is selected, the router does not apply port triggering rules even if you specified them.
7. Click the Apply button.
Your settings are saved.
Application Example: Port Triggering for Internet Relay Chat
Some application servers, such as FTP and IRC servers, send replies to multiple port numbers. Using port
triggering, you can tell the router to open more incoming ports when a particular outgoing port starts a
session.
An example is Internet Relay Chat (IRC).Your computer connects to an IRC server at destination port 6667.
The IRC server not only responds to your originating source port but also sends an “identify” message to
your computer on port 113. Using port triggering, you can tell the router, “When you initiate a session with
destination port 6667, you must also allow incoming traffic on port 113 to reach the originating computer.”
The following sequence shows the effects of this port triggering rule:
Manage Port Forwarding and Port Triggering
162
AC1750 Smart WiFi Router Model R6350
To Next Page
Loading...
Need help?
General
Weight and Dimensions
