(Continued)
DescriptionField
Security Options
This information applies to the 5 GHz WiFi network.
If you change the WiFi security, select one of the following WiFi security options for the router’s WiFi network:
• None. An open WiFi network that does not provide any security. Any WiFi device can join the selected WiFi
network in the 5 GHz band of the WiFi network. We recommend that you do not use an open WiFi network.
• WPA2-PSK [AES]. This option is the default setting.This type of security enables WiFi devices that support
WPA2 to join the selected WiFi network in the 5 GHz band of the WiFi network. If you did not change the
passphrase, the default passphrase displays.The default passphrase is printed on the router label.WPA2
provides a secure connection but some older WiFi devices do not detect WPA2 and support only WPA. If
your network includes such older devices, select WPA-PSK [TKIP] + WPA2-PSK [AES] security.
If you change the passphrase, in the Passphrase field, enter a phrase of 8 to 63 characters.To join the
selected WiFi network in the 5 GHz band of the WiFi network, a user must enter this passphrase.
• WPA-PSK [TKIP] + WPA2-PSK [AES].This type of security enables WiFi devices that support either WPA
or WPA2 to join the selected WiFi network in the 5 GHz band of the WiFi network. However, WPA-PSK [TKIP]
is less secure than WPA2-PSK [AES] and limits the speed of WiFi devices to 54 Mbps.
To use this type of security, in the Passphrase field, enter a phrase of 8 to 63 characters.To join the selected
WiFi network in the 5 GHz band of the WiFi network, a user must enter this passphrase.
• WPA/WPA2 Enterprise. This type of security requires that your WiFi network can access a RADIUS server.
6. Click the Apply button.
Your settings are saved.
If you connected over WiFi to the network and you changed the SSID, you are disconnected from the
network.
7. Make sure that you can reconnect over WiFi to the network with its new settings.
If you cannot connect over WiFi, check the following:
• If your computer or mobile device is already connected to another WiFi network in your area,
disconnect it from that WiFi network and connect it to the WiFi network that the router provides.
Some WiFi devices automatically connect to the first open network without WiFi security that they
discover.
• If your computer or mobile device is trying to connect to your network with its old settings (before
you changed the settings), update the WiFi network selection in your computer or mobile device to
match the current settings for your network.
• Does your computer or mobile device display as an attached device? (See View Devices Currently
on the Network on page 127.) If it does, it is connected to the network.
• Are you using the correct network name (SSID) and password?
Configure WEP Legacy WiFi Security
Wired Equivalent Privacy (WEP) security is a legacy authentication and data encryption mode that is
superseded by WPA-PSK and WPA2-PSK. WEP limits the WiFi transmission speed to 54 Mbps (the router
is capable of higher speeds in the 2.4 GHz band).
Manage the Basic WiFi Network Settings
52
AC1750 Smart WiFi Router Model R6350
To Next Page
Loading...
Need help?
General
Weight and Dimensions
