NETGEAR WAX204

traffic flowing from the access point to WiFi devices. WMM defines the following four
queues in decreasing order of priority:
•
Voice. The highest priority queue with minimum delay, which makes it very suitable
for applications such as VoIP and streaming media.
•
Video. The second highest priority queue with low delay. Video applications are
routed to this queue.
•
Best effort. The medium priority queue with medium delay. Most standard IP
applications use this queue.
•
Background. The low priority queue with high throughput. Applications such as
FTP that are not time-sensitive but require high throughput can use this queue.
By default, WMM is enabled for both radios, but you can disable WMM for one or both
radios.
To disable WMM for one or both radios:
1.
Launch a web browser from a computer or mobile device that is connected to the
access point network.
2.
Enter http//www.routerlogin.net in the address field.
If you are not connected to the access point network but to the same network as the
access point, enter the IP address that is assigned to the access point. If you do not
know the IP address, see Find the IP address of the access point when you cannot
use routerlogin.net on page 27.
A login window displays.
If your browser does not display the login window but displays a security message
and does not let you proceed, see Log in to the access point after initial setup on
page 30.
3. Enter the access point local device password.
The local device password is the one that you specified. The local device password
is case-sensitive.
The BASIC Home page displays.
4. Select ADVANCED > Setup > QoS Setup.
The QoS Setup page displays.
5. Select the WMM tab.
The Quality of Service page displays.
6.
Clear the Enable WMM (Wi-Fi multimedia) settings check box for the radio to
disable WWM, or clear both check boxes for both radios.
7. Click the Apply button.
User Manual104Optimize Performance
WiFi 6 AX1800 Dual Band Wireless Access Point WAX204