NETGEAR WAX204

7. To clear the log entries, click the Clear Log button.
Status and statistics
You can view information about the access point and its ports and the status of the
Internet connection and WiFi network. In addition, you can view traffic statistics for the
various ports.
Display information about the Internet port, access point,
and WiFi settings [router mode]
If the access point is in router mode, you can display information about the access point,
the IP addresses, and the WiFi settings for each radio.
To display information about the access point and the IP and WiFi settings if the
access point is in router mode:
1.
Launch a web browser from a computer or mobile device that is connected to the
access point network.
2.
Enter http//www.routerlogin.net in the address field.
If you are not connected to the access point network but to the same network as the
access point, enter the IP address that is assigned to the access point. If you do not
know the IP address, see Find the IP address of the access point when you cannot
use routerlogin.net on page 27.
A login window displays.
If your browser does not display the login window but displays a security message
and does not let you proceed, see Log in to the access point after initial setup on
page 30.
3. Enter the access point local device password.
The local device password is the one that you specified. The local device password
is case-sensitive.
The BASIC Home page displays.
4. Select ADVANCED.
The ADVANCED Home page displays.
User Manual146Maintain and Monitor
WiFi 6 AX1800 Dual Band Wireless Access Point WAX204