NETGEAR WAX204

The color in the heading of each of the panes uses the following coding:
•
Green circle. The settings are fine and no problems exist. For a WiFi network, a
green circle displays if the network is enabled and secured.
•
Red circle. Settings are disabled, a problem exists, or the connection is down.
For a WiFi network, a red circle displays if the network is disabled.
The following tables describe the fields in the panes on the Advanced Home page.
DescriptionField
Router Information
The access point hardware version, which is the model number WAX204.Hardware Version
The access point firmware version. If you update the firmware, the version changes
(see Update the firmware on page 129).
Firmware Version
The access point language version for the local browser UI.GUI Language Version
The operation mode is Router. For more information about the changing the
operation mode, see Change the system mode to access point mode or to router
mode on page 164.
Operation Mode
The usage load on the CPUsCPU Load
The RAM memory that is being used and the available memory.Memory Usage (Used/Total)
The flash memory that is being used and the available memory.Flash Usage (Used/Total)
The time elapsed since the access point was last restarted.System Uptime
LAN Port (This is a subsection in the Router Information pane)
The single MAC address that applies to all four access point LAN ports combined.MAC Address
The IP address that applies to all four access point LAN ports. For more information,
see Change the LAN IP address and subnet settings [router mode] on page 109.
IP Address
If the access point is in router mode, this field displays if the DHCP server of the
access point is enabled (the default setting in router mode) or disabled (see Disable
the DHCP server [router mode] on page 112).
DHCP Server
User Manual147Maintain and Monitor
WiFi 6 AX1800 Dual Band Wireless Access Point WAX204