NETGEAR WAX204

Remove all keywords and domains from the blocked list
[router mode]
You can simultaneously remove all keywords and domains from the blocked list.
To remove all keywords and domains from the blocked list:
1.
Launch a web browser from a computer or mobile device that is connected to the
access point network.
2.
Enter http//www.routerlogin.net in the address field.
If you are not connected to the access point network but to the same network as the
access point, enter the IP address that is assigned to the access point. If you do not
know the IP address, see Find the IP address of the access point when you cannot
use routerlogin.net on page 27.
A login window displays.
If your browser does not display the login window but displays a security message
and does not let you proceed, see Log in to the access point after initial setup on
page 30.
3. Enter the access point local device password.
The local device password is the one that you specified. The local device password
is case-sensitive.
The BASIC Home page displays.
4. Select ADVANCED > Security > Block Sites.
The Block Sites page displays.
5. Click the Clear List button.
All keywords and domains are removed from the blocked list.
6. Click the Apply button.
Your settings are saved.
Block specific applications and services from
the Internet [router mode]
If the access point is in router mode, you can add service blocking rules to prevent
access from your LAN to specific services and applications on the Internet. In addition,
you can specify if a blocking rule applies to one user, a range of users, or all users on
your LAN. The access point lists many default services and applications that you can
User Manual89Security, Firewall, and Access
Rules
WiFi 6 AX1800 Dual Band Wireless Access Point WAX204