Assign a trusted device [router mode]
If the access point is in router mode, you can exempt one trusted device from blocking
and logging.
The device that you exempt must be assigned a fixed (static) IP address.
To assign a trusted device:
1.
Launch a web browser from a computer or mobile device that is connected to the
access point network.
2.
Enter http//www.routerlogin.net in the address field.
If you are not connected to the access point network but to the same network as the
access point, enter the IP address that is assigned to the access point. If you do not
know the IP address, see Find the IP address of the access point when you cannot
use routerlogin.net on page 27.
A login window displays.
If your browser does not display the login window but displays a security message
and does not let you proceed, see Log in to the access point after initial setup on
page 30.
3. Enter the access point local device password.
The local device password is the one that you specified. The local device password
is case-sensitive.
The BASIC Home page displays.
4. Select ADVANCED > Security > Block Sites.
The Block Sites page displays.
5. Scroll down and select the Allow trusted IP address to visit blocked sites check
box.
6.
In the Trusted IP Address field, enter the IP address of the trusted device.
The first three octets of the IP address (by default, 192.168.1) are automatically
populated and depend on the IP address that is assigned to the DHCP server of the
access point. For more information, see Manage the DHCP server address pool
[router mode] on page 110.
7. Click the Apply button.
Your settings are saved.
User Manual95Security, Firewall, and Access
Rules
WiFi 6 AX1800 Dual Band Wireless Access Point WAX204
To Next Page
Loading...
