12
Advanced WiFi and Radio Features
This chapter describes how you can manage the advanced WiFi and radio features of
the access point. For information about the basic WiFi and radio settings, see Basic WiFi
and Radio Features on page 58.
Tip: If you want to change the settings of the access point’s WiFi network, use a wired
connection to avoid being disconnected when the new WiFi settings take effect.
The chapter includes the following sections:
• Change the region of operation
• Manage 802.11ax and enable or disable OFDMA for a radio
• Enable or disable smart connect for the access point
• Enable or disable 20/40 MHz coexistence for the 2.4 GHz radio
• Change the channel for a radio
• Change the WiFi throughput mode for a radio
• Change the transmission output power for a radio
• Add a WiFi schedule for a radio
• Enable or disable MU-MIMO
• Enable or disable explicit beamforming
• Enable or disable PMF
• Set up access point as a WiFi Bridge to another device
• Change the CTS/RTS threshold and preamble mode for a radio
187
To Next Page
Loading...
