NETGEAR WAX204

To enable or disable the automatic update of the Performance Optimization
Database:
1.
Launch a web browser from a computer or mobile device that is connected to the
access point network.
2.
Enter http//www.routerlogin.net in the address field.
If you are not connected to the access point network but to the same network as the
access point, enter the IP address that is assigned to the access point. If you do not
know the IP address, see Find the IP address of the access point when you cannot
use routerlogin.net on page 27.
A login window displays.
If your browser does not display the login window but displays a security message
and does not let you proceed, see Log in to the access point after initial setup on
page 30.
3. Enter the access point local device password.
The local device password is the one that you specified. The local device password
is case-sensitive.
The BASIC Home page displays.
4.
Select BASIC > Quality of Service.
The QoS Setup page displays.
In the Performance Optimization Database section, the version and release of the
database are displayed.
5.
Select or clear the Automatically update performance optimization database
check box.
6. Click the Apply button.
Your settings are saved.
7.
To immediately let the access point update the Performance Optimization Database
if an update is available, click the Update Now button.
Manage WiFi Multimedia (WMM) for a radio
WiFi Multimedia (WMM) is a subset of the 802.11e standard. Time-dependent information
such as video or audio is given higher priority than normal traffic. For WMM to function
correctly, WiFi clients must also support WMM. By enabling WMM, you allow WMM to
control upstream traffic flowing from WiFi devices to the access point and downstream
User Manual103Optimize Performance
WiFi 6 AX1800 Dual Band Wireless Access Point WAX204