NETGEAR WAX204

•
LAN ports 1 through 4. Four Gigabit Ethernet RJ-45 LAN ports numbered LAN 1
through LAN 4 to connect the access point to Ethernet devices such as a computer
and a switch.
•
Reset button. Press the Reset button to reset the access point to factory default
settings. For more information, see Use the dual-function Reset button to return to
factory defaults on page 138.
•
DC power connector. Connect the power adapter that came in the product package
to the DC power connector.
Position the antennas for best WiFi
performance
You can swivel the three access point antennas in any direction. For best WiFi
performance, we recommend that you experiment with various antenna positions. For
example, you could position the center antenna vertically and aim the other two antennas
outward at 45-degree angles.
Access point label
The access point label on the bottom panel of the access point shows the default login
information, default WiFi network name (SSID), default WiFi passphrase, serial number
and MAC address of the access point, and other information.
Figure 3. Access point label
User Manual14Hardware Overview
WiFi 6 AX1800 Dual Band Wireless Access Point WAX204