know the IP address, see Find the IP address of the access point when you cannot
use routerlogin.net on page 27.
A login window displays.
If your browser does not display the login window but displays a security message
and does not let you proceed, see Log in to the access point after initial setup on
page 30.
3. Enter the access point local device password.
The local device password is the one that you specified. The local device password
is case-sensitive.
The BASIC Home page displays.
4. Select BASIC > Attached Devices.
The Attached Devices page displays.
5.
Select the radio button for the device for which you want to change the priority.
6. Click the Edit button.
The Edit Device page displays.
7.
Select one of the following Device Priority buttons: Highest, High, Medium, or Low.
Note: For information about changing display settings for the device, see Display
the devices currently on the access point network and change device information
on page 154.
8. Click the Apply button.
Your settings are saved.
User Manual107Optimize Performance
WiFi 6 AX1800 Dual Band Wireless Access Point WAX204
To Next Page
Loading...
