NETGEAR WAX204

If your browser does not display the login window but displays a security message
and does not let you proceed, see Log in to the access point after initial setup on
page 30.
3. Enter the access point local device password.
The local device password is the one that you specified. The local device password
is case-sensitive.
The BASIC Home page displays.
4. Select ADVANCED > Advanced Setup > Dynamic DNS.
The Dynamic DNS page displays.
5. Select the Use a Dynamic DNS Service check box.
6. From the Service Provider menu, select your provider.
7. Select the Yes radio button.
8.
In the Host Name field, enter the host name (sometimes called the domain name)
for your account.
9.
Depending on the type of account, specify your user name or email address:
•
For a No-IP or Dyn account, in the User Name field, enter the user name for your
account.
•
For a NETGEAR account, in the Email field, enter the email address for your
account.
10.
In the Password field, enter the password for your DDNS account.
11. Click the Apply button.
Your settings are saved.
12.
To verify that your DDNS service is enabled in the access point, click the Show Status
button.
A pop-window displays the DDNS status.
User Manual170Dynamic DNS [Router Mode]
WiFi 6 AX1800 Dual Band Wireless Access Point WAX204