NETGEAR WAX204

If you are not connected to the access point network but to the same network as the
access point, enter the IP address that is assigned to the access point. If you do not
know the IP address, see Find the IP address of the access point when you cannot
use routerlogin.net on page 27.
A login window displays.
If your browser does not display the login window but displays a security message
and does not let you proceed, see Log in to the access point after initial setup on
page 30.
3. Enter the access point local device password.
The local device password is the one that you specified. The local device password
is case-sensitive.
The BASIC Home page displays.
4. Select ADVANCED > Advanced Setup > Wireless Settings.
The Wireless Settings page displays. The lower part of the page is called the
Advanced Wireless Settings page. (As you scroll down on the page, the page name
changes.)
5.
Do one of the following:
•
2.4 GHz radio. To change the settings for the 2.4 GHz radio, scroll down to the
Advanced Wireless Settings (2.4 GHz/b/g/n/ax) section.
•
5 GHz radio. To change the settings for the 5 GHz radio, scroll down to the
Advanced Wireless Settings (5 GHz 802.11a/n/ac/ax) section.
Note: If the smart connect feature is enabled (which it is by default), the page
presents a single option in the Advanced Wireless Settings (2.4 GHz/b/g/n/ax & 5
GHz 802.11a/n/ac/ax) section. In that situation, setting up or changing a WiFi schedule
applies to both radios simultaneously. If the smart connect feature is disabled, you
can set up or change a WiFi schedule for each radio individually.
6. Click the Add a new period button.
The settings to turn off the WiFi signal display.
7. Use the menus, radio buttons, and check boxes to set up a period during which you
want to turn off the WiFi signal for the selected radio and specify whether the schedule
is recurrent.
The start time and end time cannot be identical, even if they fall on different days.
For example, if you start the schedule at 12:00 midnight, you cannot end it on another
day at 12:00 midnight but you can end it at 11:30 p.m. or 12:30 a.m.
8. Click the Apply button.
User Manual198Advanced WiFi and Radio
Features
WiFi 6 AX1800 Dual Band Wireless Access Point WAX204