NETGEAR WAX204

3.
Look for the access point’s network and select it.
If you did not change the default SSID, the default SSID is printed on the access point
label. Otherwise, the SSID is the one that you specified during the initial log-in
process.
For security, we recommend that you change the name of the default SSID.
4.
Enter the WiFi password for WiFi access.
If you did not change the WiFi password (network key), the default WiFi password
is printed on the access point label. Otherwise, the WiFi password is the one that
you specified during the initial log-in process.
For security, we recommend that you change the default WiFi password.
5. Click the Connect button.
The device connects to the WiFi network of the access point.
User Manual34Installation and Initial Log-in
WiFi 6 AX1800 Dual Band Wireless Access Point WAX204