NETGEAR WAX204

To enable or disable a WiFi radio:
1.
Launch a web browser from a computer or mobile device that is connected to the
access point network.
2.
Enter http//www.routerlogin.net in the address field.
If you are not connected to the access point network but to the same network as the
access point, enter the IP address that is assigned to the access point. If you do not
know the IP address, see Find the IP address of the access point when you cannot
use routerlogin.net on page 27.
A login window displays.
If your browser does not display the login window but displays a security message
and does not let you proceed, see Log in to the access point after initial setup on
page 30.
3. Enter the access point local device password.
The local device password is the one that you specified. The local device password
is case-sensitive.
The BASIC Home page displays.
4. Select ADVANCED > Advanced Setup > Wireless Settings.
The Wireless Settings page displays. The lower part of the page is called the
Advanced Wireless Settings page. (As you scroll down on the page, the page name
changes.)
5.
Do one of the following:
•
2.4 GHz radio. To change the settings for the 2.4 GHz radio, scroll down to the
Advanced Wireless Settings (2.4 GHz/b/g/n/ax) section.
•
5 GHz radio. To change the settings for the 5 GHz radio, scroll down to the
Advanced Wireless Settings (5 GHz 802.11a/n/ac/ax) section.
Note: If the smart connect feature is enabled (which it is by default), the page
presents a single option in the Advanced Wireless Settings (2.4 GHz/b/g/n/ax & 5
GHz 802.11a/n/ac/ax) section. In that situation, enabling or disabling applies to both
radios simultaneously. If the smart connect feature is disabled, you can enable or
disable each radio individually.
6.
Turn off or turn on the radio:
•
Turn off the radio. Clear the Enable Wireless Router Radio check box.
•
Turn on the radio. Select the Enable Wireless Router Radio check box.
7. Click the Apply button.
User Manual71Basic WiFi and Radio Features
WiFi 6 AX1800 Dual Band Wireless Access Point WAX204