EasyManuals Logo

NETGEAR WNDAP360 User Manual

NETGEAR WNDAP360
137 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #41 background imageLoading...
Page #41 background image
Wireless Configuration and Security
41
ProSafe Dual Band Wireless-N Access Point WNDAP360
_________________________________________________________________________
Form for 802.11a/an modes
Store this information in a safe place:
SSID: The
service set identification (SSID) identifies the wireless local area network. You
can customize it by using up to 32 alphanumeric characters. Write your SSID on the line.
SSID:
___________________________________
The SSID in the wireless access point is the SSID you configure on
the wireless adapter
card. All wireless nodes in the same network need to be configured with the same SSID.
WEP Key Size,
Key Format Passphrase, and Authentication
Choose the key size by circling one: 64, 128, or 152 bits.
Choose the key format by circling one: ASCII or HEX.
Choose the authentication type by circling on
e: Open or Shared.
Passphrase:
___________________________________
Note: If yo
u select shared key, the other devices in the network will not connect unless
they are set to shared key and have the same keys in the same positions as those in the
wireless access point.
WP
A-PSK (Pre-Shared Key) and WPA2-PSK
Record the WPA-PSK passphrase:
WPA-PSK Passphrase:
________________________________
Record the WPA2-PSK passphrase:
WPA2-PSK Passphrase:
________________________________
WPA RADIUS Settings
For WPA, record the following settings for the primary and secondary RADIUS servers:
Server Name/IP Address: Primary
________________ Secondary _________________
Port:
___________________________________
Shared Secret:
___________________________________
WP
A2 RADIUS Settings
For WPA2, record the following settings for the primary and secondary RADIUS servers:
Server Name/IP Address: Primary
________________ Secondary _________________
Port:
___________________________________
Shared Secret:
___________________________________
_________________________________________________________________________

Table of Contents

Other manuals for NETGEAR WNDAP360

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the NETGEAR WNDAP360 and is the answer not in the manual?

NETGEAR WNDAP360 Specifications

General IconGeneral
VLAN supportYes
Frequency band2.4 - 5 GHz
Number of users50 user(s)
Cabling technology10/100/1000BASE-T(X)
Ethernet LAN data rates10, 100, 1000 Mbit/s
Maximum data transfer rate1000 Mbit/s
Antenna connector typeSMA
Antenna gain level (max)5 dBi
Weight (imperial)1.93 lbs
Networking featuresGigabit Ethernet
Compliance industry standardsIEEE 802.11a, IEEE 802.11g, IEEE 802.11n, IEEE 802.3af, IEEE802.1x
WAN connectionEthernet (RJ-45)
Ethernet LAN (RJ-45) ports1
Security algorithms64-bit WEP, 128-bit WEP, EAP, EAP-TLS, EAP-TTLS, PEAP, SSH, SSL/TLS, TTLS, WEP, WPA, WPA2
Power requirements12 VDC, 1A
Power consumption (typical)10.51 W
Minimum system requirementsInternet Explorer 6.0, Mozilla Firefox 1.5
Compatible operating systems- Windows Vista, XP, 2000, 98, Me - Mac OS - UNIX - Linux
InternalNo
LED indicatorsLAN
Cable lock slot typeKensington
Weight and Dimensions IconWeight and Dimensions
Height54.76 mm
Weight878 g
Dimensions (WxDxH)253.75 x 253.76 x 54.76 mm

Related product manuals