Wireless Configuration and Security
57
ProSafe Dual Band Wireless-N Access Point WNDAP360
To configure basic wireless QoS:
1. Select Configuration > Wireless > Basic > QoS Settings. The basic QoS Settings
screen displays:
Figure 30.
2. Optionally: To display the basic QoS Settings screen for the 802.11a/na modes, click the
802.11a/na tab.
3. Enable
or disable the WMM features:
• Enable W
i-Fi Multimedia (WMM). To enable this feature, select the Enable radio
button, which is the default setting. Select the Disable button to disable the feature.
• WMM Powersave. T
o enable this feature, select the Enable radio button, which is the
default setting. Select the Disable button to disable the feature.
4. Click App
ly to save your settings.