EasyManuals Logo

NETGEAR WNDAP360 User Manual

NETGEAR WNDAP360
137 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #82 background imageLoading...
Page #82 background image
Advanced Configuration
82
ProSafe Dual Band Wireless-N Access Point WNDAP360
Tagged VLAN. When you clear the Untagged VLAN check box, the wireless access point
tags all frames that are sent from its Ethernet interface. Only incoming frames that are
tagged with known VLAN IDs are accepted.
Managem
ent VLAN. The management VLAN can be active only when the wireless
access point functions as a point-to-point or point-to-multipoint bridge (see Configure
Wireless Bridging on
page 89). The management VLAN is used for managing traffic
(Telnet, SNMP, and HTTP) to and from the wireless access point.
Frames belonging to the management VLAN a
re not given any 802.1Q header when they
are sent over the trunk. If a port is in a single VLAN, it can be untagged. However, if the
port is a member of multiple VLANs, it needs to be tagged.
To configure STP and VLANs:
1. Select Configuring > Sys
tem > Advanced > General. The advanced General system
settings screen displays:
Figure 49.
2. Specify the settings as explained in the following table:
Table 23. STP and VLAN Settings
Field Description
Spanning Tree Protocol
Spanning Tree Protocol Select the Enable radio
button to enable STP to prevent path redundancy. By
default, the Disable radio button is selected.
802.1Q VLAN
Untagged VLAN Select the Un
tagged VLAN check box to configure one VLAN as an untagged
VLAN. By default, the Untagged VLAN check box is selected.
Specify a VLAN ID. The default VLAN ID is 1.

Table of Contents

Other manuals for NETGEAR WNDAP360

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the NETGEAR WNDAP360 and is the answer not in the manual?

NETGEAR WNDAP360 Specifications

General IconGeneral
VLAN supportYes
Frequency band2.4 - 5 GHz
Number of users50 user(s)
Cabling technology10/100/1000BASE-T(X)
Ethernet LAN data rates10, 100, 1000 Mbit/s
Maximum data transfer rate1000 Mbit/s
Antenna connector typeSMA
Antenna gain level (max)5 dBi
Weight (imperial)1.93 lbs
Networking featuresGigabit Ethernet
Compliance industry standardsIEEE 802.11a, IEEE 802.11g, IEEE 802.11n, IEEE 802.3af, IEEE802.1x
WAN connectionEthernet (RJ-45)
Ethernet LAN (RJ-45) ports1
Security algorithms64-bit WEP, 128-bit WEP, EAP, EAP-TLS, EAP-TTLS, PEAP, SSH, SSL/TLS, TTLS, WEP, WPA, WPA2
Power requirements12 VDC, 1A
Power consumption (typical)10.51 W
Minimum system requirementsInternet Explorer 6.0, Mozilla Firefox 1.5
Compatible operating systems- Windows Vista, XP, 2000, 98, Me - Mac OS - UNIX - Linux
InternalNo
LED indicatorsLAN
Cable lock slot typeKensington
Weight and Dimensions IconWeight and Dimensions
Height54.76 mm
Weight878 g
Dimensions (WxDxH)253.75 x 253.76 x 54.76 mm

Related product manuals