OPR360US H0711
2-6
2
Overview
Main Screen
Refer to Foldout F-4, item 6.
Press the Main Screen menu button on the Control Panel to reveal
five GUI menu buttons: Waves, Loops, Numeric, Trends and Freeze.
When Freeze is selected the Adjustment knob will move a cursor
across the screen and display data and time relevant to the point the
cursor is crossing. The user can choose to “Save” the current screen
or touch “Start” to deactivate the Freeze function. See Section 4 for
more details.
Extended Functions Screen
Refer to Foldout F-4, item 6.
Press the Extended Functions menu button on the Control Panel to
reveal five GUI menu buttons: Insp Hold, Exp Hold, Event History,
Save and Freeze. Touch and hold Insp Hold or Exp Hold to start the
maneuver for the current or following mandatory breath (the Accept
button is not needed). Touch the Event History button to access the
Event History log that records up to 1000 events. See Section 4 for
more details.
Setup & Calibration Screen
Refer to Foldout F-4, item 6.
Press the Setup & Calibration menu button on the Control Panel to
reveal four GUI menu buttons: Circuit Check, Sensors, Patient Setup
and Technical. See Section 4 for more details.
GUI (Graphical User Interface) Miscellaneous
Indicators
Refer to Foldout F-4, item A.
The top area of the GUI provides useful information and icons that
relate to ventilator settings and conditions. This is referred to as the
Status Bar area.
To Next Page
Loading...
