OPR360US H0711
4-21
Setting Up For Patient Use
4
Download Feature
Touching Screen Files and Event History Files buttons on the
Technical screen allows retrieval and downloading of the stored
images and spreadsheet files to an external flash drive via the USB
port on the rear of the ventilator (See Figure 4-8).
1. Press the Setup & Calibration button on the control panel.
2. Touch the Technical button on the GUI.
3. Touch the Screen Files (for screen image files) or the Event
History Files (for Event/Alarm History files) button.
A scrollable table of the corresponding saved files will appear.
4. Install a USB compatible flash drive (level 2.0 or later) into the
USB port on the back of the ventilator (located below the power
switch). Ensure that the flash drive is installed securely.
5. Using the Adjustment knob, highlight a file to be downloaded.
6. Touch the Download button.
7. When the download to the flash drive is complete, a “File storing
successful” message will appear with a short, two-tone beep.
Figure 4-8 Screen and Event History Files List screens
(for download)