EasyManua.ls Logo

Newport e360 Service Manual

Newport e360
129 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
Newport Medical Instruments, Inc.
NEWPORT e360 VENTILATOR
Service Manual
SER360 Rev. A
11/06
NEWPOR
T
MEDICAL
INSTRUMENTS, INC.
1620 Sunflower Avenue
Costa Mesa, CA
92626 USA
Tel: 714.427.5811
T
el: 800.451.3111 (USA only)
Fax: 714.427.0489
Customer Service ext. 282
www
.NewportNMI.com
email:
Info@NewportNMI.com
0050

Table of Contents

Other manuals for Newport e360

Question and Answer IconNeed help?

Do you have a question about the Newport e360 and is the answer not in the manual?

Newport e360 Specifications

General IconGeneral
TypeVentilator
Target patientAdult, Pediatric
Respiratory Rate1 to 150 bpm
FiO221 to 100%
AlarmsHigh pressure, Low pressure, High respiratory rate, Low respiratory rate, FiO2 high, FiO2 low, Power failure
Inspiratory Time0.1 to 10 sec

Summary

1. INTRODUCTION

General Warnings

Provides essential safety guidelines and warnings.

2. MAINTENANCE, OVERHAUL & SOFTWARE UPGRADE

General Warnings and Cautions

Provides essential safety guidelines before servicing.

Software Upgrade Procedure

Instructions for updating the ventilator's software.

3. TROUBLESHOOTING GUIDE

Troubleshooting Guide

Provides guidance on diagnosing and resolving ventilator issues.

Device Alert Messages

Lists and explains error messages and their meanings.

4. COMPONENT REMOVAL & REPLACEMENT

Main Board and Internal Electronics

Procedures for replacing main board, analog board, and computer boards.

5. CALIBRATION PROCEDURES

Diagnostic Mode and Analog PCB Calibration

Guide to diagnostic mode and analog PCB calibration steps.

Pneumatic System Calibration

Procedures for calibrating pneumatic components like regulators and valves.

Sensor and Valve Calibration

Instructions for calibrating exhalation flow sensor and servo valves.

6. OPERATIONAL VERIFICATION PROCEDURE

Electrical Safety and Basic Checks

Procedures for electrical safety and front panel LED checks.

Circuit, Gas, and Alarm System Verification

Verifies circuit integrity, gas supply, FIO2, and alarm functions.

Ventilation Parameter Performance Checks

Checks performance of flow, tidal volume, rate, pressure, and PEEP.

APPENDIX C: DIAGRAMS

Related product manuals