6 Place the main board support with main board in an ESD safe
container.
7 To reinstall, reverse above steps 2 through 5.
Note: Cable CBL2102A connects from P308 on PCB2100A to the
top Red LED. Cable CBL2125A connects from P309 on
PCB2100A to the top Amber LED.
Removal and Replacement of Display Board PCB2102A
Figure 4-6 Display Board PCB2102A
Figure 4-7 Touch Screen Board PCB2105P
Refer to figures 4-6 and 4-7 and follow these steps:
SECTION 4
Encoder
cable and
J209
Remove
9 screws
PCB2102A
CBL2112A PCB2105P 2 screws secure
PCB2105P
4 pin ribbon cable
SER360 A1106 4-7
To Next Page
Loading...
