OPR360US H0711
4-9
Setting Up For Patient Use
4
WARNING! Always ensure that ventilator settings that are not in use
(their displays are dimmed) are set at appropriate, safe levels in case
of accidental breath type or mode changes.
NOTE: When Freeze is activated, the Freeze button turns to “Start”
and all other menu buttons are dimmed and not functional until Start
is pressed.
BPRV/
ACMV
BPRV/
SIMV
VTPC/
ACMV
VTPC/
SIMV
VTPC/
SPONT
Control
Display
X X X X X
F
IO2
D D X X X
Tidal
Volume
D D D D D
Flow
X X X X D
t Insp
X X X X D
Resp. Rate
D X D D D
Pressure
Support
X X X X X
Pressure
Limit
X X X X X
PEEP/CPAP
X X X X X
Trig
X X X X X
Slope/Rise
D X D X X
Exp. Thresh
D D D D D
Pause
X
ON
X
ON
D D D
Open Exh
(ON/OFF)
D D D D D
Flow Wave
Must be
OFF
Must be
OFF
X
ON
X
ON
X
ON
Volume
Target (ON /
OFF)
Pressure
Control
and ACMV
Pressure
Control
and
SIMV
Volume
Control,
Pressure
Control
ACMV
Volume
Control,
Pressure
Control
SIMV
Volume
Control,
Pressure
Control
SPONT
Mode LEDs
Table 4-1: Ventilation Controls Guide (cont.)
To Next Page
Loading...
