OPR360US H0711
4-18
4
Setting Up For Patient Use
Data Sets
Refer to Figure 4-7
Selected sets of data may be viewed on the GUI during ventilation
utilizing the Data Sets button at the bottom of the GUI screen.
Three different monitored data subsets and one settings subset are
accessed by touching the tabs at lower right corner of the display. The
Data Sets are labeled: Basic, Mechanic, Weaning, and Advanced. The
following table lists the parameters displayed in each data set. For
information on a specific parameter, refer to Section 8, Specifications.
Figure 4-7 Data Sets
To Next Page
Loading...
