OPR360US H0711
4-19
Setting Up For Patient Use
4
Save Feature
The Save Feature is available from these screens: Waves, Loops,
Trends, Numeric, Extended Functions, P0.1, NIF, Alarms setting,
Alarm History and Event History. Screens that have been saved can
be accessed from the Technical screen for download.
Screen image files are saved in .bmp format and Event History files
are saved in .csv format. To make them easier to identify, each saved
file is assigned an 8-digit file name which includes a letter indicating
the type of file (i.e., W for wave, L for loop, H for history, etc.), the
last four digits of the ventilator’s serial number, and a three digit
sequential number. A maximum of 200 Screen or Event (and Alarm)
History files can be saved. After 200 of either type are saved, the
oldest file is deleted.
When the Save function is complete, e360 emits a short, two-tone
beep.
Basic Mechanics Weaning Advanced
(settings)
Ppeak (Peak
Pressure)
Time Constant RR Spont
(Respiratory Rate
Spontaneous)
Slope/Rise
PEEP Pplat
(Plateau
Pressure)
P0.1 Exp. Thresh
(Expiratory
Threshold)
F
iO2 Total PEEP MVE Spont
(Minute Ventilation
Exhaled
Spontaneous)
Pause
MVE (Minute
Volume
Exhaled)
Cstat
(Static
Compliance)
RSBI
(Rapid Shallow
Breathing Index)
Open Exh.
(Open
Exhalation
Valve)
VTE
(Tidal Volume
Exhaled)
RI
(Inspiratory
Resistance)
NIF Flow
Waveform
(Shape)
RRtot
(Total
Respiratory
Rate)
RE (Expiratory
Resistance)
I:E
(I:E Ratio)
Volume
Target
Data Sets
To Next Page
Loading...
