13/71
Modem Web Interface
MDM2210
User Manual R4.1 v1.0
4.5.2 Overview
4.5.2.1 Ethernet Overview
The Ethernet status is indicated by a state description. The possible Ethernet state descriptions are
given below.
Ethernet status
Description
Ok
A DHCP address is given and the connection is OK.
Warning
Only appears if DHCP is enabled.
Connection is OK, but no DHCP address is given.
Error
Connection is not OK.
4.5.2.2 Wi-Fi Overview
The Wi-Fi status is indicated by a state description. The possible Wi-Fi state descriptions are given
below.
Wi-Fi status
Description
OK
A DHCP address is given and the connection is OK.
A client device is connected with the MDM2210 through the Wi-Fi.
Wi-Fi Operational
but no leases
Wi-Fi is enabled, but there is no client device connected to the Wi-Fi.
Error
Connection is not OK.
To Next Page
Loading...
