Newtec MDM2210 - Wi-Fi Clients and Channel Load; Wi-Fi Speed Test Execution

65/71
Modem Web Interface
MDM2210
User Manual R4.1 v1.0
4.11.2 Clients and Channels
Clients
Parameter Description
Name
Indicates the name of the connected device (for example a Smart Phone,
Laptop, ....).
Authenticated
The client is correctly authenticated by the MDM2210.
PHY Rate This is the actual physical rate between the modem and the client device.
Signal Quality This indicates the strength (in dBm) of the Wi-Fi signal between the
modem and the client device.
Channels
Parameter Description
Channel [Current] Indicates the channel that is used to establish the Wi-Fi connection
between the MDM2210 and client devices.
Load
Indicates how much capacity is used of the channel.
It indicates if the channel is being saturated or not.
» Click Start Scan to update the results.
4.11.3 Speed Test
With this test it is possible to check the speed between the MDM2210 and the client device.
The following results are displayed:
Parameter Description
Download Speed The download speed in Mbps.
Upload Speed The upload speed in Mbps.
» Click Start to update the results.