31/71
Modem Web Interface
MDM2210
User Manual R4.1 v1.0
4.7.1.2 The Parameters of the Ethernet Interface
The displayed parameters and their description:.
Ethernet
Parameter Description
Ethernet
Ethernet MAC address MAC address of the Ethernet interface
Management IP address Management IP address of the Ethernet interface
Netmask
Network range for the user's LAN
IPv4
Parameter Description
IPv4
NAT Enabled Enable or disable the Network Address Translation.
NAT enables a LAN to use one set of IP addresses for internal
traffic and a second set of IP addresses for external traffic.
Next to translating IP addresses this function also performs port
translation.
Note: Enabling the NAT can be disabled by the Service Provider.
In such case, the NAT parameter is read-only.
LAN IP Address This is the modems public IP address in case NAT is enabled.
DHCP v4 Range The DHCP settings are only visible when NAT is enabled.
Enter an IP range from which the DHCP server can select IP
addresses.
When no range is specified, the complete range is available to
the DHCP server.
WAN IP Address This is the public IP address towards the Service Provider.
To Next Page
Loading...
