51/71
Modem Web Interface
MDM2210
User Manual R4.1 v1.0
4.7.5.3 Edit the Multicast Configuration
» Click Edit in the Web Interface > View Multicast configuration to change the Multicast Settings.
» Edit the parameters.
» Click Save in the Web Interface > Edit Multicast configuration to save the new settings.
In case an invalid multicast IP address is replacing a valid multicast IP address, the last
valid multicast IP address will still be in use.
You see a committed multicast configuration screen, which confirms the applied settings:
If "disabled" mode is selected, following screen is shown:
A similar screen is shown if "IGMP Dynamic" mode is selected.
To Next Page
Loading...
