22/71
Modem Web Interface
MDM2210
User Manual R4.1 v1.0
4.6.4.2 Check the Pointing
• If the antenna is correctly and optimally pointed, the message Correct satellite - pointed
optimally appears in the modem webGUI. You can now proceed to the next section: Finishing
the Pointing.
• If the antenna is not yet optimally pointed, the message Correct satellite - not pointed
optimally is displayed. Continue the pointing procedure until optimal pointing is achieved.
In case of problems, refer to the Troubleshooting Guide available on the CD-ROM provided with
your modem.
4.6.4.3 Finishing the Pointing
» Switch off the Point&Play tool.
» Remove the TX cable from the Point&Play tool and connect it to the TX interface of the iLNB.
» Back at your computer, click Finish Pointing .
To Next Page
Loading...
