41/71
Modem Web Interface
MDM2210
User Manual R4.1 v1.0
4.7.3.3 Edit the Satellite Interface Configuration
Editing the Satellite Interface Configuration can be disabled by the Service Provider.
In such case, the Edit button is not present and the configuration settings are
read-only.
» Click EDIT in the Web Interface > View Satellite Configuration Interface.
» Edit the parameters to be changed.
At least the preferred initial receive carrier and default pointing carrier must be
enabled.
» Click Save in the Web Interface > Edit Configuration Satellite Interface to save the new
settings.
To Next Page
Loading...
