Nice MOONCLEVER MC424 User Manual

6 – English
5.3.1 - Level one programming: functions
Atlevel1,thefunctionscanbeenabledordisabled.Atlevelone,LEDP1is
alwayson;ifLEDsL1,L2…L5areon,thefunctionsareactivated;iftheLEDs
areoff,thefunctionsaredeactivated.AashingLEDindicateswhichfunction
hasbeenselected,shortashesindicatethefunctionhasbeendeactivated;
longashesindicatethefunctionhasbeenactivated.PressP3topassfrom
part one programming to part two programming, and vice-versa.
TABLE A1 - Entering level one programming
01. PressandholddownbuttonsP1andP2foratleast3seconds
 TheprogrammingmodehasbeenenteredifalltheLedsstartashingquickly
TABLE A2 - Activating or deactivating a function
01. PressP1repeatedlyuntiltheashingLedreachesthefunctionrequired
02. PressP1repeatedlyuntiltheashingLedreachesthefunctionrequired
TABLE A3 - To pass from part one to part two of level one (and vice-versa)
01. Press P3. button
TABLE A4 - To exit level one and save the modications
01. PressP1andthenimmediatelyP2,holdingthembothdownforatleast3seconds
TABLE A5 - Exiting level one and delete the modications
01. EitherpressP1foratleast3seconds,orwaitfor1minute,ordisconnectthepowersupply
P1 P2
P1
P2
P3
P1 P2
3s or  60s
or
P1
5.3.2 - Level two programming: parameters
Thefunctionparametercanbechosenatleveltwo.Leveltwocanonlybe
reachedfromlevelone.Atlevel2theP1Ledashesquicklywhilethe5Leds
(L1,L2…L5)indicatetheselectedparameter.
TABLE B1 - Entering level two programming
01. EnterleveloneprogrammingbypressingP1andP2foratleast3seconds
02. SelectthefunctionbypressingP1untiltheashingLedreachesthepointrequired
03. Enter level two by pressing the P2 button for at least 3 seconds
TABLE B2 - Selecting the parameter
01. Press P2 repeatedly until the Led reaches the desired parameter
TABLE B3 - Returning to level one
01. PressP1
TABLE B4 - Exiting level one and saving modications
01. PressP1andthenimmediatelyP2,holdingthembothdownforatleast3seconds
TABLE B5 - Exiting level one and cancelling modications
01. EitherpressP1foratleast3seconds,orwaitfor1minute,ordisconnectthepowersupply
3 s
P1 P2
P1 P2
3s or  60s
or
P1
P1
P2
P1
P2
3 s
3 s
EN
www.metalines.com
sales@metalines.com

Nice MOONCLEVER MC424 Specifications

General

Brand	Nice
Model	MOONCLEVER MC424
Category	Control Unit
Language	English