Nice ROAD 400 - Page 110

CE declaration of conformity
Declaration in accordance with the following Directives: 1999/5/EC (R&TTE), 2004/108/EC (EMC);
2006/42/EC (MD) annex II, part B
Note - The content of this declaration corresponds to that specified in the official document deposited at the Nice S.p.A. headquarters
and, in particular, to the latest revised edition available prior to the publishing of this manual. The text herein has been re-edited for edito-
rial purposes. A copy of the original declaration can be requested from Nice S.p.A. (prov. of Treviso), Italy.
Number: 297/ROAD400 Revision: 6 Language: EN
Manufacturer's Name: Nice s.p.a.
Address: ViaPezzaAlta13,–31046RustignèdiOderzo(TV)Italy
Person authorized to draw up technical documentation: Nice s.p.a.
Type of product: ROAD400 electromechanical gearmotor with incorporated control unit
Model / Type: ROAD400
Accessories: no accessory
The undersigned Mauro Sordini, as Chief Executive Officer, hereby declares under his own responsibility that the product identified above
complies with the provisions of the following directives:
• DIRECTIVE1999/5/ECOFTHEEUROPEANPARLIAMENTANDOFTHECOUNCILof9March1999onradioequipmentandtelecom-
munications terminal equipment and the mutual recognition of their conformity, in accordance with the following harmonised standards:
 - Healthandsafety(art.3(1)(a)):EN62479:2010
 - Electricalsafety(art.3(1)(a)):EN60950-1:2006+A11:2009+A12:2011+A1:2010+A2:2013
 - Electromagneticcompatibility(art.3(1)(b)):EN301489-1V1.9.2:2011;EN301489-3V1.6.1:2013
 - Radiospectrum(Art.3(3)):EN300220-2V2.4.1:2010
• DIRECTIVE2004/108/ECOFTHEEUROPEANPARLIAMENTANDOFTHECOUNCILof15December2004ontheapproximationof
thelawsoftheMemberStatesrelatingtoelectromagneticcompatibilityandrepealingDirective89/336/EEC,inaccordancewithfollow-
ingharmonisedstandards:EN61000-6-2:2005,EN61000-6-3:2007+A1:2011
In addition, the product conforms to the following directive in accordance with the provisions applicable to partly completed machinery:
• Directive2006/42/ECOFTHEEUROPEANPARLIAMENTANDCOUNCILofMay172006regardingmachinesandamendingdirective
95/16/EC(consolidatedtext).
–IherebydeclarethatthepertinenttechnicaldocumentationhasbeendraftedinaccordancewithAnnexVIIBofDirective2006/42/EC
and that the following essential requirements have been fulfilled: 1.1 - 1.1.2 - 1.1.3 - 1.2.1 - 1.2.6 - 1.5.1 - 1.5.2 - 1.5.5 - 1.5.6 - 1.5.7
- 1.5.8 - 1.5.10 - 1.5.11
– The manufacturer agrees to send the national authorities pertinent information on the partly completed machinery, in response to a mo-
tivated request, without affecting its intellectual property rights.
– If the partly completed machinery is operated in a European country with an official language other than the language used in this dec-
laration, the importer must include a translation with this declaration.
– The partly completed machinery must not be operated until the final machine in which it is to be incorporated is declared to conform to
theprovisionsofDirective2006/42/EC,ifapplicable.
Theproductalsocomplieswiththefollowingstandards:EN60335-1:2002+A1:2004+A11:2004+A12:2006+A2:2006+A13:2008+
A14:2010
+A15:2011;EN60335-2-103:2003+A11:2009
Thepartsoftheproductwhicharesubjecttothefollowingstandardscomplywiththem:EN13241-1:2003+A1:2011;EN12445:2002;
EN12453:2002;EN12978:2003+A1:2009
Oderzo, 30 April 2015
Mr. Mauro Sordini
 (ChiefExecutiveOfficer)
IX
EN