ENGLISH – 11
3. cast the concrete to secure the foundation plate (“Figure 9")
9
a
Before the concrete hardens, make sure the foundation
plate is perfectly level and parallel to the gate leaf.
4. wait for the concrete to harden and then remove the nuts (“Figure
10")
10
l
It is possible to use the foundation plate already present
and compatible supplied with anchor bolts. (“Figure 11")
11
5. position the gearmotor (D) while taking care to insert the pinion (E)
beneath the rack (F) (“Figure 12")
D
F
E
12
6. verify that the gearmotor lies parallel to the gate leaf (“Figure 13")
13
7. check that the pinion is aligned with the rack (“Figure 14")
14
To Next Page
Loading...
