80
Image quality is set by pressing the T button and rotating
the main command dial until the desired setting is displayed in
the control panel.
T button Main command
dial
Control panel
A NEF (RAW) Images
NEF (RAW) images can be viewed on the camera or using software
such as ViewNX 2 or Capture NX-D (ViewNX 2 can be installed from the
supplied installer CD, while Capture NX-D can be downloaded from a
link in the ViewNX 2 installer; 0 253).
JPEG copies of NEF (RAW)
images can be created using the NEF (RAW) processing option in the
retouch menu (0 399).
A NEF+JPEG
When photographs taken at settings of NEF (RAW) + JPEG are viewed
on the camera with only one memory card inserted, only the JPEG
image will be displayed.
If both copies are recorded to the same
memory card, both copies will be erased when the photo is deleted.
If
the JPEG copy is recorded to a separate memory card using the
Secondary slot function > RAW primary - JPEG secondary option,
deleting the JPEG copy will not delete the NEF (RAW) image.
A The Image Quality Menu
Image quality can also be adjusted using the Image quality option in
the shooting menu (0 290).
To Next Page
Loading...
