382
This option is displayed only when an Eye-Fi memory card
(available separately from third-party suppliers) is inserted in the
camera.
Choose Enable to upload photographs to a preselected
destination.
Note that pictures will not be uploaded if signal
strength is insufficient.
Observe all local laws concerning wireless devices and choose
Disable where wireless devices are prohibited.
Eye-Fi Upload
G button ➜ B setup menu
D Eye-Fi Cards
Eye-Fi cards may emit wireless signals when Disable is selected.
If a
warning is displayed in the monitor (0 470), turn the camera off and
remove the card.
Set Custom Setting c2 (Standby timer, 0 319) to 30 s or more when
using an Eye-Fi card.
See the manual provided with the Eye-Fi card, and direct any inquiries
to the manufacturer.
The camera can be used to turn Eye-Fi cards on
and off, but may not support other Eye-Fi functions.
To Next Page
Loading...
