39
Focus
To focus using autofocus, rotate the
focus-mode selector to AF and follow the
steps below to choose autofocus and
AF-area modes.
For information on
focusing manually, see page 41.
❚❚ Choosing a Focus Mode
The following autofocus modes are available during live view
photography and movie live view:
To choose an autofocus mode, press the AF-mode button and
rotate the main command dial until the desired mode is
displayed in the monitor.
Mode Description
AF-S
Single-servo AF: For stationary subjects.
Focus locks when shutter-
release button is pressed halfway.
AF-F
Full-time servo AF: For moving subjects.
Camera focuses
continuously until shutter-release button is pressed.
Focus locks
when shutter-release button is pressed halfway.
AF-mode button Main command
dial
Monitor
Focus-mode selector
To Next Page
Loading...
