Nikon D810 - USB Cable Clip (0

258
2 Start Nikon Transfer 2 component of ViewNX 2.
If a message is displayed prompting you to choose a
program, select Nikon Transfer 2.
A The USB Cable Clip
To prevent cable from being disconnected, attach the supplied clip
as shown.
D USB Hubs
Connect the camera directly to the computer; do not connect the
cable via a USB hub or keyboard.
A Windows 7
If the following dialog is displayed, select Nikon Transfer 2 as
described below.
1 Under Import pictures and videos,
click Change program.
A program
selection dialog will be displayed;
select Import File using
Nikon Transfer 2 and click OK.
2 Double-click Import File.