383
When an Eye-Fi card is inserted, its status
is indicated by an icon in the information
display:
• d: Eye-Fi upload disabled.
• e: Eye-Fi upload enabled but no
pictures available for upload.
• f (static): Eye-Fi upload enabled;
waiting to begin upload.
• f (animated): Eye-Fi upload enabled; uploading data.
• g: Error — camera can not control Eye-Fi card.
If a flashing
W appears in the control panel or viewfinder, refer to page
470; if this indicator is not flashing, pictures can be taken
normally but you may be unable to change Eye-Fi settings.
View the current camera firmware version.
A Supported Eye-Fi Cards
Some cards may not be available in some countries or regions; consult
the manufacturer for more information.
Eye-Fi cards are for use only in
the country of purchase.
Be sure the Eye-Fi card firmware has been
updated to the latest version.
Firmware Version
G button ➜ B setup menu
To Next Page
Loading...
