444
Storage
When the camera will not be used for an extended period,
remove the battery and store it in a cool, dry area with the
terminal cover in place.
To prevent mold or mildew, store the
camera in a dry, well-ventilated area.
Do not store your camera
with naphtha or camphor moth balls or in locations that:
• are poorly ventilated or subject to humidities of over 60%
• are next to equipment that produces strong electromagnetic
fields, such as televisions or radios
• are exposed to temperatures above 50 °C (122 °F) or below
–10 °C (14 °F)
Cleaning
Do not use alcohol, thinner, or other volatile chemicals.
Caring for the Camera
Camera body
Use a blower to remove dust and lint, then wipe gently
with a soft, dry cloth.
After using the camera at the
beach or seaside, wipe off sand or salt with a cloth lightly
dampened in distilled water and dry thoroughly.
Important: Dust or other foreign matter inside the camera
may cause damage not covered under warranty.
Lens, mirror,
and viewfinder
These glass elements are easily damaged.
Remove dust
and lint with a blower.
If using an aerosol blower, keep
the can vertical to prevent the discharge of liquid.
To
remove fingerprints and other stains, apply a small
amount of lens cleaner to a soft cloth and clean with
care.
Monitor
Remove dust and lint with a blower.
When removing
fingerprints and other stains, wipe the surface lightly
with a soft cloth or chamois leather.
Do not apply
pressure, as this could result in damage or malfunction.
To Next Page
Loading...
