125
3 Choose a shutter speed.
While the exposure meters are on,
rotate the main command dial to
choose a shutter speed of Bulb
(A) or Time (&).
The exposure
indicators do not appear when Bulb
(A) or Time (&) is selected.
4 Open the shutter.
Bulb: After focusing, press the shutter-release button on the
camera or optional remote cord or wireless remote controller
all the way down.
Keep the shutter-release button pressed
until the exposure is complete.
Time: Press the shutter-release button all the way down.
5 Close the shutter.
Bulb: Remove your finger from the shutter-release button.
Time: Press the shutter-release button all the way down.
Bulb
Time
To Next Page
Loading...
