161
5 Measure white balance.
Before the indicators stop flashing, frame the
reference object so that it fills the viewfinder and
press the shutter-release button all the way
down.
The camera will measure a value for white balance and
store it in the preset selected in Step 3.
No photograph will
be recorded; white balance can be measured accurately even
when the camera is not in focus.
6 Check the results.
If the camera was able to measure a
value for white balance, C will
flash in the control panel for about
six seconds, while the viewfinder
will show a flashing a.
If lighting is too dark or too bright,
the camera may be unable to
measure white balance.
A flashing
ba will appear in the control
panel and viewfinder for about six
seconds.
Press the shutter-release
button halfway to return to Step 5
and measure white balance again.
Control panel
Viewfinder
Control panel
Viewfinder
To Next Page
Loading...
