211
3 Choose the number of shots.
Highlight Number of shots and
press 2.
Press 1 or 3 to choose the number
of exposures that will be combined
to form a single photograph and
press J.
A The D Button
If Multiple exposure is selected for
Custom Setting f8 (Assign BKT button;
0 350), you can select the multiple
exposure mode by pressing the D
button and rotating the main command
dial and the number of shots by
pressing the D button and rotating
the sub-command dial.
The mode and
number of shots are shown in the
control panel: n and F appear when
On (series) is selected and n when On
(single photo) is selected; no icon
appears when multiple exposure is off.
To Next Page
Loading...
