348
❚❚ Press + Command Dials
Selecting Press + command dials displays the following
options:
Option Description
i
Choose image
area
Press the Fn button
and rotate a
command dial to
choose from pre-
selected image areas
(0 74).
Selecting
Choose image area
displays a list of image areas; highlight options
and press 2 to select or deselect, then press J.
$
Shutter spd &
aperture lock
Press the Fn button and rotate the main
command dial to lock shutter speed in modes f
and h; press the Fn button and rotate the sub-
command dial to lock aperture in modes g and
h.
See page 126 for more information.
v
1 step spd/
aperture
If the Fn button is pressed when the command
dials are rotated, changes to shutter speed
(exposure modes f and h) and aperture
(exposure modes g and h) are made in
increments of 1 EV, regardless of the option
selected for Custom Setting b2 (EV steps for
exposure cntrl, 0 315).
w
Choose non-CPU
lens number
Press the Fn button and rotate a command dial to
choose a lens number specified using the Non-
CPU lens data option (0 229).
y
Active
D-Lighting
Press the Fn button and rotate the command
dials to adjust Active D-Lighting (0 182).
&
Exposure delay
mode
Press the Fn button and rotate a command dial to
choose an exposure delay mode (0 322).
None
No operation is performed when the command
dials are rotated while the Fn button is pressed.
To Next Page
Loading...
