431
1 Not available with spot metering.
2 Can also be selected with flash unit.
3 AA/A mode selection performed on flash unit using custom settings.
Unless lens data have
been provided using the Non-CPU lens data option in the setup menu, “A” will be
selected when a non-CPU lens is used.
4 Can only be selected with camera.
5Available only during close-up photography.
6 Unless lens data have been provided using the Non-CPU lens data option in the setup
menu, non-TTL auto (A) is used with non-CPU lenses, regardless of mode selected with flash
unit.
7 Available only in i-TTL, AA, A, GN, and M flash-control modes.
8 Availalbe only in i-TTL, AA, and A flash-control modes.
9 Available only in commander mode.
10 Firmware updates for the SB-910 and SB-900 can be performed from the camera.
Color Information Communication zzz——zz
Auto FP High-Speed Sync
7
z zzzz——
FV lock
8
z zzzzzz
AF-assist for multi-area AF zzzz
9
———
Red-eye reduction zzz——z —
Camera modeling illumination z zzzz——
Camera flash mode selection — — — — — zz
Camera flash unit firmware update z
10
z ————z
SB-910, SB-900,
SB-800
SB-700
SB-600
SU-800
SB-R200
SB-400
SB-300
To Next Page
Loading...
